Show simple item record

contributor authorMartin Udengaard
contributor authorKarl Iagnemma
date accessioned2017-05-09T00:34:13Z
date available2017-05-09T00:34:13Z
date copyrightDecember, 2009
date issued2009
identifier issn1050-0472
identifier otherJMDEDB-27913#121002_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/141284
description abstractAn omnidirectional mobile robot is able, kinematically, to move in any direction regardless of current pose. To date, nearly all designs and analyses of omnidirectional mobile robots have considered the case of motion on flat, smooth terrain. In this paper, an investigation of the design and control of an omnidirectional mobile robot for use in rough terrain is presented. Kinematic and geometric properties of the active split offset caster drive mechanism are investigated along with system and subsystem design guidelines. An optimization method is implemented to explore the design space. The use of this method results in a robot that has higher mobility than a robot designed using engineering judgment. A simple kinematic controller that considers the effects of terrain unevenness via an estimate of the wheel-terrain contact angles is also presented. It is shown in simulation that under the proposed control method, near-omnidirectional tracking performance is possible even in rough, uneven terrain.
publisherThe American Society of Mechanical Engineers (ASME)
titleAnalysis, Design, and Control of an Omnidirectional Mobile Robot in Rough Terrain
typeJournal Paper
journal volume131
journal issue12
journal titleJournal of Mechanical Design
identifier doi10.1115/1.4000214
journal fristpage121002
identifier eissn1528-9001
keywordsRobots
keywordsSurface roughness
keywordsDesign
keywordsIsotropy
keywordsMobile robots
keywordsWheels AND Optimization
treeJournal of Mechanical Design:;2009:;volume( 131 ):;issue: 012
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record