Show simple item record

contributor authorJong-Hee Kim
contributor authorRak-Hyun Song
contributor authorDong-Ryul Shin
date accessioned2017-05-09T00:33:24Z
date available2017-05-09T00:33:24Z
date copyrightAugust, 2009
date issued2009
identifier issn2381-6872
identifier otherJFCSAU-28938#031012_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/140840
description abstractThe anode-supported tubular solid oxide fuel cells were fabricated and joined onto the metal cap (SUS430) for current collecting and sealing by using the induction brazing process. Among five filler materials used in the induction brazing, Ni-based BNi2 has shown the lowest gas permeability of 1×10−6 l cm−2 s−1 at a differential pressure of 3 atm measured with He gas. The electrical conductivity of anode support brazed with BNi2 showed 450 S cm−1 at 750°C and stable value even at the long-term and thermal cycle tests. The brazed anode-supported tubular cell at operating temperature of 750°C produced 210 mW/cm2 at 0.7 V. The gas-tightness was confirmed by open circuit voltage (OCV) value similar to theoretical value. The cell showed a stable performance and OCV for 200 h.
publisherThe American Society of Mechanical Engineers (ASME)
titleJoining of Metallic Cap and Anode-Supported Tubular Solid Oxide Fuel Cell by Induction Brazing Process
typeJournal Paper
journal volume6
journal issue3
journal titleJournal of Fuel Cell Science and Technology
identifier doi10.1115/1.3006344
journal fristpage31012
identifier eissn2381-6910
keywordsElectromagnetic induction
keywordsAnodes
keywordsBrazing
keywordsSolid oxide fuel cells
keywordsJoining
keywordsPermeability
keywordsFillers (Materials)
keywordsElectrical conductivity AND Metals
treeJournal of Fuel Cell Science and Technology:;2009:;volume( 006 ):;issue: 003
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record