Show simple item record

contributor authorGuojun Hu
contributor authorSpencer Chew
contributor authorJing-En Luan
date accessioned2017-05-09T00:32:22Z
date available2017-05-09T00:32:22Z
date copyrightMarch, 2009
date issued2009
identifier issn1528-9044
identifier otherJEPAE4-26292#011010_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/140327
description abstractAfter encapsulation, thermomechanical deformation builds up within the electronic packages due to the temperature coefficient of expansion mismatch between the respective materials within the package as it cools to room temperature. At the same time, the chemical cure shrinkage exerts important influence on the total deformation. Due to the complexity and time consuming of the calculation, it is almost impossible for an industry to carry out the numerical simulation using viscoelastic property, which is the most close to the real material property of polymer material. However, finite element analysis (FEA) using temperature-dependent elastic property, temperature-dependent thermal expansion coefficient, and accurate chemical cure shrinkage can help to improve the accuracy on the stress and warpage prediction. This study has developed an evaluation method for the chemical cure shrinkage based on the measurement of the warpage of bimaterial model. The results show that FEA simulations without chemical cure shrinkage fail to accurately predict the package warpage. On the other hand, FEA simulations with chemical cure shrinkage are outlined, which show fair agreement with experimental measurements of package warpage over a range of temperatures. Furthermore, this study has evaluated the effect of silica filler percentage on the chemical cure shrinkage and confirmed that the chemical cure shrinkage decreases with the increase in silica filler percentage.
publisherThe American Society of Mechanical Engineers (ASME)
titleCharacterization of Chemical Cure Shrinkage of Epoxy Molding Compound With Application to Warpage Analysis
typeJournal Paper
journal volume131
journal issue1
journal titleJournal of Electronic Packaging
identifier doi10.1115/1.3068321
journal fristpage11010
identifier eissn1043-7398
keywordsMolding
keywordsShrinkage (Materials)
keywordsWarping
keywordsFinite element analysis
keywordsEpoxy adhesives AND Temperature
treeJournal of Electronic Packaging:;2009:;volume( 131 ):;issue: 001
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record