Show simple item record

contributor authorZongjie Han
contributor authorShenglin Yu
contributor authorLiang Zhang
contributor authorSongbai Xue
contributor authorJianxin Wang
contributor authorXin Zhang
date accessioned2017-05-09T00:32:19Z
date available2017-05-09T00:32:19Z
date copyrightJune, 2009
date issued2009
identifier issn1528-9044
identifier otherJEPAE4-26295#021004_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/140303
description abstractIn this paper, soldering experiments of fine pitch quad flat package (QFP) devices were carried out when soldered with Sn–Ag–Cu and Sn–Cu–Ni lead-free solders by means of diode laser soldering system, and compared with the experimental results soldered with Sn–Pb solders and with infrared (IR) reflow soldering method. The results indicate that under the conditions of laser continuous scanning mode and the fixed laser soldering time, an optimal power is obtained when the optimal mechanical properties of QFP microjoints are achieved. Mechanical properties of QFP microjoints soldered with laser soldering system are better than that of QFP microjoints soldered with IR soldering method. Results also indicate that adding rare earth element Ce to Sn–Ag–Cu and Sn–Cu–Ni lead-free solders improves mechanical properties of QFP microjoints, and the optimal amount of Ce is about 0.03%.
publisherThe American Society of Mechanical Engineers (ASME)
titleLaser Soldering of Fine Pitch QFP Devices Using Lead-Free Solders
typeJournal Paper
journal volume131
journal issue2
journal titleJournal of Electronic Packaging
identifier doi10.1115/1.3103932
journal fristpage21004
identifier eissn1043-7398
keywordsLasers
keywordsSolders
keywordsSoldering
keywordsMechanical properties
keywordsLead-free solders AND Reflow soldering
treeJournal of Electronic Packaging:;2009:;volume( 131 ):;issue: 002
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record