Show simple item record

contributor authorStefan Martens
contributor authorFrédéric Courtade
contributor authorJuergen Wilde
contributor authorFriedemann Voelklein
contributor authorPhilippe Perdu
contributor authorWalter Mack
date accessioned2017-05-09T00:32:17Z
date available2017-05-09T00:32:17Z
date copyrightSeptember, 2009
date issued2009
identifier issn1528-9044
identifier otherJEPAE4-26298#031006_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/140285
description abstractThe trend toward 3D integration in electronic packaging requires that failure analysis procedures and target preparation methods are adapted from conventional discrete packages to these emerging packaging technologies. This paper addresses the feasibility of laser-based target preparation in 3D integrated devices, especially stacked-die packages. Various laser technologies such as ultrashort-pulse lasers, excimer lasers, and diode-pumped solid-state (DPSS) lasers with different wavelengths and pulse durations were evaluated. In particular, it was found that ultrashort-pulse lasers with pulse durations in the femtosecond range were not suitable for ablation of the molding compound (MC). Picosecond lasers were applicable with certain constraints. It was found that for MCs with high filler content, DPSS lasers with pulse durations in the nanosecond range were the best choice. For the removal of stacked silicon dies, the laser wavelength was the most important factor in artifact-free thinning. Laser cross sections through several silicon dies with remarkably small heat-affected zones were also demonstrated. The distinct removal of the MC, silicon dies, and metal interconnected with a single laser source offers new opportunities for laser-based target preparation in 3D integrated electronic packaging devices.
publisherThe American Society of Mechanical Engineers (ASME)
titleLaser-Based Target Preparation in 3D Integrated Electronic Packages
typeJournal Paper
journal volume131
journal issue3
journal titleJournal of Electronic Packaging
identifier doi10.1115/1.3144157
journal fristpage31006
identifier eissn1043-7398
keywordsLasers AND Silicon
treeJournal of Electronic Packaging:;2009:;volume( 131 ):;issue: 003
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record