Show simple item record

contributor authorA. Deppe
contributor authorH. Saathoff
contributor authorU. Stark
date accessioned2017-05-09T00:30:54Z
date available2017-05-09T00:30:54Z
date copyrightJanuary, 2008
date issued2008
identifier issn0889-504X
identifier otherJOTUEI-28743#015501_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/139526
description abstractThe paper “Criteria for Spike Initiated Rotating Stall” by (2008, ASME J. Turbomach., 130, p. 011023) provides a very important contribution to the understanding of spike-type stall inception in axial-flow compressors by demonstrating that spike-type disturbances are directly linked to the tip leakage flow of the rotor. The computational study of Vo et al. leads to the conclusion that two conditions have to be fulfilled simultaneously for the formation of spike-type stall: (i) axial backflow at the leading edge plane and (ii) axial backflow at the trailing edge plane. The objective of the present technical brief is to support these findings by corresponding experimental results.
publisherThe American Society of Mechanical Engineers (ASME)
titleDiscussion: “Criteria for Spike Initiated Rotating Stall” (Vo, H. D., Tan, C. S., Greitzer, E. M., 2008, ASME J. Turbomach., 130, p. 011023)
typeJournal Paper
journal volume130
journal issue1
journal titleJournal of Turbomachinery
identifier doi10.1115/1.2750673
journal fristpage15501
identifier eissn1528-8900
keywordsCompressors
keywordsRotors
keywordsAxial flow
keywordsPressure
keywordsStall inception
keywordsProbes
keywordsLeakage flows AND Flow (Dynamics)
treeJournal of Turbomachinery:;2008:;volume( 130 ):;issue: 001
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record