Show simple item record

contributor authorNiels Heinrichson
contributor authorIlmar Ferreira Santos
date accessioned2017-05-09T00:30:43Z
date available2017-05-09T00:30:43Z
date copyrightJanuary, 2008
date issued2008
identifier issn0742-4787
identifier otherJOTRE9-28756#011009_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/139438
description abstractA three-dimensional thermoelastohydrodynamic model is applied to the analysis of tilting-pad bearings with spherical pivots and equipped with deep recesses in the high-pressure regions. A potential for a 10–20% reduction in the friction loss compared to conventional plain bearing pads is documented. Design suggestions minimizing the power loss are given for various length-to-width ratios. The tilting angle in the sliding direction is more sensitive to correct positioning of the pivot point than conventional bearing pads. Improving the performance by equipping a tilting-pad bearing with a deep recess therefore requires accurate analysis and design of the bearing. Similarly, a high sensitivity perpendicular to the sliding direction suggests that this method of reducing friction is more feasible when using line pivots or spring beds than when using spherical pivots for controlling the tilting angle.
publisherThe American Society of Mechanical Engineers (ASME)
titleReducing Friction in Tilting-Pad Bearings by the Use of Enclosed Recesses
typeJournal Paper
journal volume130
journal issue1
journal titleJournal of Tribology
identifier doi10.1115/1.2805428
journal fristpage11009
identifier eissn1528-8897
keywordsFriction
keywordsBearings
keywordsHigh pressure (Physics)
keywordsFilm thickness AND Design
treeJournal of Tribology:;2008:;volume( 130 ):;issue: 001
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record