Show simple item record

contributor authorFatih Karpat
contributor authorStephen Ekwaro-Osire
contributor authorMorshed P. Khandaker
date accessioned2017-05-09T00:29:48Z
date available2017-05-09T00:29:48Z
date copyrightApril, 2008
date issued2008
identifier issn1050-0472
identifier otherJMDEDB-27871#042306_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/138929
description abstractCurrently, there is an increased interest in the application of microelectromechanical system (MEMS) gear drives. Additionally, requirements for transmitted power and related reliability issues have increased. Reliability issues often occur due to uncertainties of material, geometry, and loading conditions of the MEMS gears. Asymmetric gear teeth are used to improve the performance of gears by increasing the load capacity or by reducing vibrations. In this paper, asymmetric gear teeth are proposed for MEMS applications. The objective of this research is to investigate the feasibility of applying asymmetric gears for MEMS devices while accounting for uncertainty. The Weibull failure theory was applied to four different MEMS gear configurations. The following analyses were carried out in this research: (i) for the calculation of root stress, four different asymmetric gears were used; (ii) for the calculation of the probability of failure, the Weibull failure theory formulization was used, and (iii) the efficacy of the various asymmetric tooth configurations was discussed. Specifically, the probability of failure of the asymmetric gear was extracted for various parameters. The parameters considered included pressure angle, tooth height, and contact ratio. The efficacy of using asymmetric gear teeth was shown in this study.
publisherThe American Society of Mechanical Engineers (ASME)
titleProbabilistic Analysis of MEMS Asymmetric Gear Tooth
typeJournal Paper
journal volume130
journal issue4
journal titleJournal of Mechanical Design
identifier doi10.1115/1.2885189
journal fristpage42306
identifier eissn1528-9001
keywordsStress
keywordsMicroelectromechanical systems
keywordsGears
keywordsFailure
keywordsGear teeth
keywordsPressure AND Probability
treeJournal of Mechanical Design:;2008:;volume( 130 ):;issue: 004
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record