Show simple item record

contributor authorQimi Jiang
contributor authorClément M. Gosselin
date accessioned2017-05-09T00:29:33Z
date available2017-05-09T00:29:33Z
date copyrightNovember, 2008
date issued2008
identifier issn1050-0472
identifier otherJMDEDB-27886#112304_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/138813
description abstractThe maximal singularity-free workspace of parallel mechanisms is a desirable criterion in robot design. However, for a 6DOF parallel mechanism, it is very difficult to find an analytic method to determine the maximal singularity-free workspace around a prescribed point for a given orientation. Hence, a numerical algorithm is presented in this paper to compute the maximal singularity-free workspace as well as the corresponding leg length ranges of the Gough–Stewart platform. This algorithm is based on the relationship between the maximal singularity-free workspace and the singularity surface. Case studies with different orientations are performed to demonstrate the presented algorithm. The obtained results can be applied to the geometric design or parameter (leg length) setup of this type of parallel robots.
publisherThe American Society of Mechanical Engineers (ASME)
titleThe Maximal Singularity-Free Workspace of the Gough–Stewart Platform for a Given Orientation
typeJournal Paper
journal volume130
journal issue11
journal titleJournal of Mechanical Design
identifier doi10.1115/1.2976452
journal fristpage112304
identifier eissn1528-9001
treeJournal of Mechanical Design:;2008:;volume( 130 ):;issue: 011
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record