Show simple item record

contributor authorZetao Xia
contributor authorSiew Hwa Chan
date accessioned2017-05-09T00:28:45Z
date available2017-05-09T00:28:45Z
date copyrightFebruary, 2008
date issued2008
identifier issn2381-6872
identifier otherJFCSAU-28932#011012_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/138382
description abstractThis paper presents the work on the development of a self-breathing mini fuel cell stack. The diameter of the five-cell stack is same as that of a D-size battery, but the length is half of it. The maximum power could reach 1.02W when operating at 2.4V. The stabilized operating temperature was 305K at 3V after 1h of operation. The cylindrical structure design makes the cathode more accessible to the ambient air and easier for the heat to be dissipated away. To assemble the fuel cell, only a single bolt was mounted through the centerline of the fuel cell, which reduced the overall weight of the stack. A mathematical 3D model based on the finite element method was developed for the cylindrical structure. The validation of the model was carried out by comparing the measured bulk performance with the predicted performance of the mini fuel cell. The current distribution was calculated and the improved design was suggested.
publisherThe American Society of Mechanical Engineers (ASME)
titleDevelopment of a Cylindrical Shape Self-Breathing Mini Fuel Cell Stack
typeJournal Paper
journal volume5
journal issue1
journal titleJournal of Fuel Cell Science and Technology
identifier doi10.1115/1.2786462
journal fristpage11012
identifier eissn2381-6910
keywordsFuel cells
keywordsDiffusion (Physics)
keywordsShapes AND Design
treeJournal of Fuel Cell Science and Technology:;2008:;volume( 005 ):;issue: 001
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record