Show simple item record

contributor authorD. A. Doman
contributor authorR. Bauer
contributor authorA. Warkentin
date accessioned2017-05-09T00:28:15Z
date available2017-05-09T00:28:15Z
date copyrightJanuary, 2008
date issued2008
identifier issn0094-4289
identifier otherJEMTA8-27103#011008_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/138114
description abstractThe contact characteristics of ceramic-metallic interactions are of critical importance in the design of high-speed ceramic rolling contact bearings. This type of interaction is not described well by traditional indentation tests since small displacements and barely discernable indentations are encountered. In this work, an optical microscopy system is described that is used to measure small indenter displacements accurately. Images of the indenter are taken throughout the test and processed using sophisticated edge detection algorithms to accurately determine the position of the center of the indenter. Thus, the indenter displacements on the order of 1μm can be measured independent of any structural flexibility present in the test apparatus. Experimental indentation tests using an alumina indenter mounted on a stainless steel post were performed and processed with the optical system. The results were compared to existing analytical models for fully elastic and elastoplastic cases as well as a finite element model developed using a Johnson–Cook plasticity material model. The comparison shows that the analytical models do not predict the experimental results well, whereas the finite element model agrees very well. Subsequent analysis of the finite element model shows that the size of the contact zone and pressure distributions, both very important in the design of bearings, can be more accurately described than the traditional analytical treatments.
publisherThe American Society of Mechanical Engineers (ASME)
titleOptical Microscopy-Aided Indentation Tests
typeJournal Paper
journal volume130
journal issue1
journal titleJournal of Engineering Materials and Technology
identifier doi10.1115/1.2806252
journal fristpage11008
identifier eissn1528-8889
keywordsForce
keywordsPressure
keywordsPlasticity
keywordsCeramics
keywordsStress
keywordsRolling contact
keywordsAlgorithms
keywordsBearings
keywordsDesign
keywordsMicroscopy
keywordsDisplacement
keywordsFinite element model
keywordsOptical microscopy
keywordsDeformation
keywordsFinite element analysis
keywordsEdge detection
keywordsStainless steel AND Bearing design
treeJournal of Engineering Materials and Technology:;2008:;volume( 130 ):;issue: 001
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record