Show simple item record

contributor authorJ. M. Blanco
contributor authorF. Peña
date accessioned2017-05-09T00:28:00Z
date available2017-05-09T00:28:00Z
date copyrightMarch, 2008
date issued2008
identifier issn1528-8919
identifier otherJETPEZ-27001#022001_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/137976
description abstractFollowing a detailed study of two of the mechanical precipitators in the air preheaters of a thermoelectric power plant, a large amount of ash that was deposited on one of the inlet conduits was observed, obstructing the incoming gas flow. A comparison of the available data for the two most recent hopper cleaning operations revealed that, on the one hand, the amount of ash collected by the clogged precipitator (A) was significantly less than that collected by the other (B) and, on the other hand, the temperature of the ash in the former was noticeably lower than in the latter. Prior to the cleaning of the conduits, a certain amount of damage was caused to the boiler dome, which meant that subsequent cleaning required the use of a hydrolazer, where it was noted that inlet pressures were very high. All of this indicated that the cause of the clogging was not physical. This paper provides a comprehensive analytical analysis that explains what happened, as well as resolving the situation.
publisherThe American Society of Mechanical Engineers (ASME)
titleAnalytical Study of the Effects of the Clogging of a Mechanical Precipitator Unit in Air Preheaters in a High-Performance Thermoelectric Power Plant Based on Available Data
typeJournal Paper
journal volume130
journal issue2
journal titleJournal of Engineering for Gas Turbines and Power
identifier doi10.1115/1.2795771
journal fristpage22001
identifier eissn0742-4795
keywordsTemperature
keywordsHeat transfer
keywordsGases
keywordsTurbulence
keywordsGas flow
keywordsBoilers
keywordsPower stations
keywordsPlates (structures)
keywordsPressure
keywordsParticulate matter
keywordsFlow (Dynamics) AND Domes (Structural elements)
treeJournal of Engineering for Gas Turbines and Power:;2008:;volume( 130 ):;issue: 002
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record