Show simple item record

contributor authorKaren E. Bevan
contributor authorJaal B. Ghandhi
date accessioned2017-05-09T00:27:55Z
date available2017-05-09T00:27:55Z
date copyrightMay, 2008
date issued2008
identifier issn1528-8919
identifier otherJETPEZ-27012#032802_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/137942
description abstractLarge-scale flows in internal combustion engines directly affect combustion duration and emission production. The effect of intake port geometry on combustion performance was studied in a four-stroke spark-ignition utility engine. Three intake port geometries were investigated at three port orientations. In-cylinder flows in orthogonal planes were measured using particle image velocimetry (PIV). The PIV data were processed to calculate the large-scale mean vorticity and mean high-pass filtered velocity. Combustion performance data were separately acquired at two load conditions at a fixed equivalence ratio, and compared with the PIV data. The cumulative distribution functions of the flow parameters did not show significant port-to-port differences in either measurement plane. The mean vorticity and high-pass filtered velocity did exhibit differences due to port orientation in the horizontal plane, but not in the vertical plane. The 0 deg ports (tangential orientation) consistently produced the highest values of large-scale mean vorticity and mean high-pass filtered velocity in the horizontal plane. The kinetic energy present at ignition was also calculated to characterize the flow. The ensemble-averaged values of the mean large-scale vorticity, high-pass filtered velocity, and kinetic energy were compared to the combustion duration. The vertical-plane vorticity and high-pass filtered velocity did not correlate with combustion performance. The horizontal-plane vorticity and high-pass filtered velocity were found to exhibit modest correlation at the fixed torque condition, and somewhat lower correlation at the wide open throttle condition. The correlation between kinetic energy and combustion duration was poor. The best correlation of flow field structure with engine performance was achieved for ports at the 0 deg port orientation. Ports at this orientation generated coherent, large-scale swirl.
publisherThe American Society of Mechanical Engineers (ASME)
titleParticle Image Velocimetry Measurements of In-Cylinder Flow in a Four-Stroke Utility Engine and Correlation With Combustion Measurements
typeJournal Paper
journal volume130
journal issue3
journal titleJournal of Engineering for Gas Turbines and Power
identifier doi10.1115/1.2830547
journal fristpage32802
identifier eissn0742-4795
keywordsFlow (Dynamics)
keywordsCombustion
keywordsEngines
keywordsCylinders
keywordsParticulate matter
keywordsMeasurement AND Vorticity
treeJournal of Engineering for Gas Turbines and Power:;2008:;volume( 130 ):;issue: 003
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record