Show simple item record

contributor authorK. Lafdi
contributor authorA. Elgafy
contributor authorO. Mesalhy
date accessioned2017-05-09T00:27:35Z
date available2017-05-09T00:27:35Z
date copyrightJune, 2008
date issued2008
identifier issn1528-9044
identifier otherJEPAE4-26285#021004_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/137768
description abstractIn the present work, the potential of using foam structures impregnated with phase change materials (PCMs) as heat sinks for cooling of electronic devices has been numerically studied. Different design parameters have been investigated such as foam properties (porosity, pore size, and thermal conductivity), heat sink shape, orientation, and use of internal fins inside the foam-PCM composite. Due to huge difference in thermal properties between the PCM and the solid matrix, two energy equation model has been adopted to solve the energy conservation equations. This model can handle local thermal nonequilibrium condition between the PCM and the solid matrix. The numerical model is based on volume averaging technique, and the finite volume method is used to discretize the heat diffusion equation. The findings show that, for steady heat generation, the shape and orientation of the composite heat sink have significant impact on the system performance. Conversely, in the case of power spike input, use of a PCM with low melting point and high latent heat is more efficient.
publisherThe American Society of Mechanical Engineers (ASME)
titleMerits of Employing Foam Encapsulated Phase Change Materials for Pulsed Power Electronics Cooling Applications
typeJournal Paper
journal volume130
journal issue2
journal titleJournal of Electronic Packaging
identifier doi10.1115/1.2912185
journal fristpage21004
identifier eissn1043-7398
keywordsThermal conductivity
keywordsPhase change materials
keywordsDesign
keywordsEquations
keywordsFins
keywordsHeat sinks
keywordsHeat
keywordsTemperature
keywordsPorosity
keywordsShapes
keywordsJunctions
keywordsComputer simulation
keywordsMelting
keywordsComputer cooling
keywordsLatent heat
keywordsCooling
keywordsComposite materials AND Heat transfer coefficients
treeJournal of Electronic Packaging:;2008:;volume( 130 ):;issue: 002
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record