Show simple item record

contributor authorW. Bruff
date accessioned2017-05-09T00:25:43Z
date available2017-05-09T00:25:43Z
date copyrightMay, 1969
date issued1969
identifier issn1087-1357
identifier otherJMSEFK-27537#323_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/136811
description abstractIs it possible to tell in advance if a material has a tendency to flood, or not? Powder materials often behave like liquids when aerated. There are engineers who still have not heard about these, even though they are used in solving material handling problems. Bad experiences are often their first meeting with the problem, a meeting characterized by surprise and trouble. At Fiskaa Verk, Elektrokemisk A/S, a particular problem with flooding of ground calcined anthracite was successfully solved by Dr. Jenike, and the method is described in [1]. Problems of this type are common, and in order to prevent such incidents in the future, some tests were made to find out if it is possible in advance to decide whether a material has a tendency to flood or not. A simple method was arrived at. Some characteristic qualities helping to clarify the problems of powder materials are also described.
publisherThe American Society of Mechanical Engineers (ASME)
titleSome Characteristic Qualities of Powder Materials
typeJournal Paper
journal volume91
journal issue2
journal titleJournal of Manufacturing Science and Engineering
identifier doi10.1115/1.3591564
journal fristpage323
journal lastpage328
identifier eissn1528-8935
keywordsMaterials handling
keywordsEngineers AND Floods
treeJournal of Manufacturing Science and Engineering:;1969:;volume( 091 ):;issue: 002
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record