Show simple item record

contributor authorM. N. Bettaïeb
contributor authorP. Velex
contributor authorM. Ajmi
date accessioned2017-05-09T00:25:11Z
date available2017-05-09T00:25:11Z
date copyrightFebruary, 2007
date issued2007
identifier issn1050-0472
identifier otherJMDEDB-27842#184_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/136525
description abstractThe present work is aimed at predicting the static and dynamic behavior of geared transmissions comprising flexible components. The proposed model adopts a hybrid approach, combining classical beam elements, elastic foundations for the simulation of tooth contacts, and substructures derived from three-dimensional (3D) finite element grids for thin-rimmed gears and their supporting shafts. The pinion shaft and body are modeled via beam elements which simulate bending, torsion and traction. Tooth contact deflections are described using time-varying elastic foundations (Pasternak foundations) connected by independent contact stiffness. In order to account for thin-rimmed gears, a 3D finite element model of the gear (excluding teeth) is set up and a pseudo-modal reduction technique is used prior to solving the equations of motion. Depending on the gear structure, the results reveal a potentially significant influence of thin rims on both quasi-static and dynamic tooth loading.
publisherThe American Society of Mechanical Engineers (ASME)
titleA Static and Dynamic Model of Geared Transmissions by Combining Substructures and Elastic Foundations—Applications to Thin-Rimmed Gears
typeJournal Paper
journal volume129
journal issue2
journal titleJournal of Mechanical Design
identifier doi10.1115/1.2406088
journal fristpage184
journal lastpage194
identifier eissn1528-9001
keywordsGears
treeJournal of Mechanical Design:;2007:;volume( 129 ):;issue: 002
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record