Show simple item record

contributor authorRyan T. Ratliff
contributor authorPrabhakar R. Pagilla
date accessioned2017-05-09T00:25:11Z
date available2017-05-09T00:25:11Z
date copyrightMarch, 2007
date issued2007
identifier issn1050-0472
identifier otherJMDEDB-27844#346_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/136516
description abstractA voice-coil motor actuator system is designed to perform a unique disk drive ramp load/unload operation. The design eliminates the necessity of increased material requirements common in ramp load disk drives. Therefore, disk drives with lower cost, higher performance actuators can realize the linear shock protection benefits of ramp loading. This study offers a complete, systematic design procedure together with required analysis for manufacture of a commutational ramp load/unload drive. The actuator is designed and optimized to meet specific move-time performance requirements. When used for ramp load/unload, however, there exists a location where input current has no influence on actuator motion. An input polarity reversal is required within the uncontrollable region to sustain the direction of actuator motion. A magnetic, restorative bias is designed that prevents the actuator from resting in the uncontrollable region while providing resistance to rotational shock effects. A state trajectory is designed that, when tracked, moves the actuator through the uncontrollable set for a successful load onto the disk at the desired load velocity. A ramp load controller is designed to track the trajectory and handle the nonlinear effects from bias and friction torque. The unique disk drive is manufactured and experiments are performed to demonstrate effectiveness of the complete design strategy.
publisherThe American Society of Mechanical Engineers (ASME)
titleDesign and Analysis of a Disk Drive Actuator for Commutational Ramp Loading
typeJournal Paper
journal volume129
journal issue3
journal titleJournal of Mechanical Design
identifier doi10.1115/1.2406106
journal fristpage346
journal lastpage360
identifier eissn1528-9001
keywordsStress
keywordsShock (Mechanics)
keywordsActuators
keywordsDesign
keywordsDisks
keywordsTorque
keywordsFriction
keywordsEngines AND Trajectories (Physics)
treeJournal of Mechanical Design:;2007:;volume( 129 ):;issue: 003
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record