Show simple item record

contributor authorShane A. Migliore
contributor authorEdgar A. Brown
contributor authorStephen P. DeWeerth
date accessioned2017-05-09T00:25:07Z
date available2017-05-09T00:25:07Z
date copyrightApril, 2007
date issued2007
identifier issn1050-0472
identifier otherJMDEDB-27846#406_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/136492
description abstractThe ability to control compliance of robotic joints is desirable because the resulting robotic mechanisms can adapt to varying task requirements and can take advantage of natural limb and joint dynamics. The implementation of controllable compliance in robots, however, is often constrained by the inherent instability of active compliance methods and by the limited availability of the custom, nonlinear springs needed by passive compliance methods. This work overcomes a major limitation of passive compliance by producing designs for two novel mechanisms capable of generating a wide variety of specifiable, nonlinear elastic relationships. One of these designs is physically implemented as a quadratic “spring” and is used to create a passively compliant robot joint with series-elastic actuation. A simple feed-forward algorithm is then experimentally shown to be sufficient to control independently and simultaneously both joint angle and joint compliance, regardless of the presence of external forces on the joint. We believe that this is the first physically constructed system to use antagonistic quadratic springs to successfully demonstrate open-loop, independent, and simultaneous control of both joint angle and joint stiffness. Because this approach better emulates the underlying joint mechanics used by animals, it may improve both the quality and variety of robotic movements.
publisherThe American Society of Mechanical Engineers (ASME)
titleNovel Nonlinear Elastic Actuators for Passively Controlling Robotic Joint Compliance
typeJournal Paper
journal volume129
journal issue4
journal titleJournal of Mechanical Design
identifier doi10.1115/1.2429699
journal fristpage406
journal lastpage412
identifier eissn1528-9001
keywordsForce
keywordsElasticity
keywordsDesign
keywordsRobotics
keywordsSprings
keywordsStiffness
keywordsStress
keywordsActuators
keywordsRollers AND Mechanisms
treeJournal of Mechanical Design:;2007:;volume( 129 ):;issue: 004
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record