Show simple item record

contributor authorHéctor Fabio Riaza
contributor authorSalvador Cardona i Foix
contributor authorLluïsa Jordi Nebot
date accessioned2017-05-09T00:25:06Z
date available2017-05-09T00:25:06Z
date copyrightMay, 2007
date issued2007
identifier issn1050-0472
identifier otherJMDEDB-27848#538_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/136483
description abstractThe base circle of a circular gear is concentric with the pitch circle and tangent to the action line. However, in a noncircular gear the base curve is not known a priori and not easy to determine. In this study, the base curves of noncircular gear wheels are obtained as the geometrical locus of the singular points on the involute tooth profile. Singular points—points from which a second involute branch begins to form on the tooth profile—restrict the allowable tooth height and allow the minimum number of teeth required to be estimated. We discuss the influence of the curvature radius of the pitch curve on the allowable tooth height and present an example to illustrate the proposed method.
publisherThe American Society of Mechanical Engineers (ASME)
titleStudy of the Base Curve and Formation of Singular Points on the Tooth Profile of Noncircular Gears
typeJournal Paper
journal volume129
journal issue5
journal titleJournal of Mechanical Design
identifier doi10.1115/1.2712221
journal fristpage538
journal lastpage545
identifier eissn1528-9001
keywordsGears AND Wheels
treeJournal of Mechanical Design:;2007:;volume( 129 ):;issue: 005
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record