Show simple item record

contributor authorGiuseppe Quaglia
contributor authorDaniela Maffiodo
contributor authorFrancesco Pescarmona
date accessioned2017-05-09T00:25:02Z
date available2017-05-09T00:25:02Z
date copyrightAugust, 2007
date issued2007
identifier issn1050-0472
identifier otherJMDEDB-27854#858_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/136440
description abstractThis paper presents the design of a mechanism with the following specifications: continuous alternate motion, wide motion phases with constant angular velocity, parallel input and output shafts, and great strokes. Those specifications derive from a possible application in the textile field. The mechanism is composed of two star wheels properly coupled together: there are two counter-rotating input wheels, alternately coupling with slots first, then teeth at each side of the output wheel. As usual for star wheels, pins and slots handle the acceleration and deceleration phases, while the constant velocity phase is performed by coupling sectors of toothed gears. A proper design of pins and slots is performed, so that at the same time when a pin from one input wheel is releasing a slot, a pin from the other input wheel engages a slot on the other side of the output wheel, forcing the latter to an opposite motion. In this way the output wheel has a continuous and smooth alternate motion. By annihilating the arrest phases typical of star wheels, the proposed system eliminates the discontinuities in the acceleration diagram. The paper develops a complete parametrical analysis of the device, underlining the effect of the constraints on the shape of the motion laws with particular emphasis on the acceleration and deceleration phases. In this way the output wheel has a continuous and smooth alternate motion. With respect to an analogous mechanism realizing the same laws of motion, e.g., cams, this device is very compact and economical, also presenting parallel input and output shafts, and significantly reduces sliding and wear.
publisherThe American Society of Mechanical Engineers (ASME)
titleA Novel Continuous Alternate Motion Mechanism With Two Input Wheels
typeJournal Paper
journal volume129
journal issue8
journal titleJournal of Mechanical Design
identifier doi10.1115/1.2735638
journal fristpage858
journal lastpage864
identifier eissn1528-9001
keywordsMotion
keywordsWheels
keywordsMechanisms AND Design
treeJournal of Mechanical Design:;2007:;volume( 129 ):;issue: 008
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record