Show simple item record

contributor authorWenming Shen
contributor authorWeileun Fang
date accessioned2017-05-09T00:25:01Z
date available2017-05-09T00:25:01Z
date copyrightSeptember, 2007
date issued2007
identifier issn1050-0472
identifier otherJMDEDB-27856#986_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/136430
description abstractThis paper presents a simplified friction clutch design, which consists of the dual Belleville spring and the friction plates. This design exploits the preset angle on the Belleville spring to increase the friction area during operation; thus, the load on spring is reduced at a given transmitted torque. Due to the increasing of friction area, the Belleville spring can also act as a friction plate, and the components required for the clutch can be reduced. The maximum transmittable torque of the clutch is easily adjusted by varying the preload on the Belleville spring. Moreover, it is very easy to assemble the components of the present clutch. To demonstrate the present design, a prototype friction clutch with a Belleville spring has been fabricated and tested. We showed that the transmitted torque remained constant for different operating speeds.
publisherThe American Society of Mechanical Engineers (ASME)
titleDesign of a Friction Clutch Using Dual Belleville Structures
typeJournal Paper
journal volume129
journal issue9
journal titleJournal of Mechanical Design
identifier doi10.1115/1.2748454
journal fristpage986
journal lastpage990
identifier eissn1528-9001
keywordsTorque
keywordsFriction
keywordsStress
keywordsDesign
keywordsSprings
keywordsPlates (structures)
keywordsDeflection AND Disks
treeJournal of Mechanical Design:;2007:;volume( 129 ):;issue: 009
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record