Show simple item record

contributor authorJeong Sam Han
contributor authorClaas Müller
contributor authorUlrike Wallrabe
contributor authorJan G. Korvink
date accessioned2017-05-09T00:24:58Z
date available2017-05-09T00:24:58Z
date copyrightNovember, 2007
date issued2007
identifier issn1050-0472
identifier otherJMDEDB-27861#1198_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/136404
description abstractThis paper demonstrates a novel quadstable monolithic mechanism (QsMM), which provides four stable equilibrium positions within its planar operation range. The QsMM has been realized from the use of both X- and Y-directional bistable structures, which utilize curved snapping beams. Two pairs of curved beams were attached to an inner frame in both X and Y directions to present an independent bistable behavior in the directions. It was found out that the design of the inner frame is crucial for the quadstability and dynamic responses of the mechanism. A millimeter-scale brass mechanism was actually fabricated by ultraprecision milling to test the quadstability and the force-displacement behavior. The prototype clearly demonstrates four distinct stable positions in its millimeter-scale operation range. The design concept, finite element simulation, fabrication, and experimental measurement of the proposed multistable mechanism have been presented. The mechanical multistability of the proposed QsMM can be utilized for multiple switching and optical networking applications, yielding low power consumption operations.
publisherThe American Society of Mechanical Engineers (ASME)
titleDesign, Simulation, and Fabrication of a Quadstable Monolithic Mechanism With X- and Y-Directional Bistable Curved Beams
typeJournal Paper
journal volume129
journal issue11
journal titleJournal of Mechanical Design
identifier doi10.1115/1.2771577
journal fristpage1198
journal lastpage1203
identifier eissn1528-9001
keywordsManufacturing
keywordsSimulation
keywordsForce
keywordsDesign
keywordsMechanisms
keywordsStructural frames
keywordsDisplacement
keywordsEngineering prototypes
keywordsBrass (Metal) AND Finite element analysis
treeJournal of Mechanical Design:;2007:;volume( 129 ):;issue: 011
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record