Show simple item record

contributor authorChiu-Fan Hsieh
contributor authorYii-Wen Hwang
date accessioned2017-05-09T00:24:55Z
date available2017-05-09T00:24:55Z
date copyrightDecember, 2007
date issued2007
identifier issn1050-0472
identifier otherJMDEDB-27863#1278_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/136385
description abstractVacuum pump plays an important role in the vacuum system. In this paper, a new method is proposed to design the Roots rotor that was the trochoidal curve with variable trochoid ratio. The fifth-order polynomial and cubic spline functions are used to generate smoothly trochoid ratio functions and thus a regular addendum curve for Roots rotor will be generated. Based on the addendum curve, the tooth profile for the complete Roots rotor is derived by the gearing theory. In order to improve the sealing between the rotor tip and the chamber, a design procedure is also developed for roots rotor with high sealing and high area efficiency. In addition, the undercutting equation is used to study the constraints of design parameters and the center of curvature is used to check the occurrence of the carryover on the tooth profile. Finally, some design examples are presented to show the feasibility of the proposed method.
publisherThe American Society of Mechanical Engineers (ASME)
titleStudy on the High-Sealing of Roots Rotor With Variable Trochoid Ratio
typeJournal Paper
journal volume129
journal issue12
journal titleJournal of Mechanical Design
identifier doi10.1115/1.2779897
journal fristpage1278
journal lastpage1284
identifier eissn1528-9001
keywordsSealing (Process)
keywordsDesign
keywordsRotors
keywordsEquations AND Polynomials
treeJournal of Mechanical Design:;2007:;volume( 129 ):;issue: 012
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record