Show simple item record

contributor authorChiu-Fan Hsieh
contributor authorYii-Wen Hwang
date accessioned2017-05-09T00:24:55Z
date available2017-05-09T00:24:55Z
date copyrightDecember, 2007
date issued2007
identifier issn1050-0472
identifier otherJMDEDB-27863#1269_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/136384
description abstractThis paper proposes a gerotor profile design based on the theory of gearing. Presented first is the curve of the outer rotor, whose conjugate profile is the inner rotor. Next, the analysis assesses the feasibility of three different design curves: an epitrochoid curve, a hypotrochoidal curve, and a curve made by continuously connecting the epicycloid and hypocycloid. The undercutting equation derived from the mathematical model—which is presented in parametric form—facilitates identification of the design parameter limits, while the sealing property and nonundercutting on the profile are estimated using curvature analyses. Finally, the offset concept is applied to the gerotor design. First, two conjugate curves are obtained, whose offset curves are then found. Pump performance—including area efficiency and sealing—is also compared for these designs, which include both offset and nonoffset rotor profiles.
publisherThe American Society of Mechanical Engineers (ASME)
titleGeometric Design for a Gerotor Pump With High Area Efficiency
typeJournal Paper
journal volume129
journal issue12
journal titleJournal of Mechanical Design
identifier doi10.1115/1.2779887
journal fristpage1269
journal lastpage1277
identifier eissn1528-9001
keywordsDesign
keywordsPumps
keywordsRotors AND Equations
treeJournal of Mechanical Design:;2007:;volume( 129 ):;issue: 012
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record