Show simple item record

contributor authorDouglas M. Matson
contributor authorScott Biederman
contributor authorRakesh Venkatesh
date accessioned2017-05-09T00:24:50Z
date available2017-05-09T00:24:50Z
date copyrightApril, 2007
date issued2007
identifier issn1087-1357
identifier otherJMSEFK-27966#425_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/136343
description abstractThe retention of pattern voids observed in the production of expandable polystyrene patterns for lost foam casting can be traced to conditions developed during mold filling and subsequent steaming. Void formation and closure, or healing, was observed using high-speed video imaging through a clear acrylic sheet cut to match one-half of a test pattern mold. Two processing conditions, i.e., the initial bead packing density and the velocity of steam as it passes between beads, were shown to significantly impact the ability of a void to heal during steaming. A model is proposed to predict conditions where voids will heal based on three criteria that relate to a limitation of the processing window, the void size, and the ability of the bead to swell.
publisherThe American Society of Mechanical Engineers (ASME)
titleExpanded Polystyrene Lost Foam Casting—Modeling Bead Steaming Operations
typeJournal Paper
journal volume129
journal issue2
journal titleJournal of Manufacturing Science and Engineering
identifier doi10.1115/1.2540608
journal fristpage425
journal lastpage434
identifier eissn1528-8935
keywordsFlow (Dynamics)
keywordsCasting
keywordsParticulate matter
keywordsPacking (Shipments)
keywordsCycles
keywordsGeometry
keywordsSteam
keywordsVents
keywordsDensity
keywordsGas flow
keywordsModeling AND Force
treeJournal of Manufacturing Science and Engineering:;2007:;volume( 129 ):;issue: 002
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record