Show simple item record

contributor authorY. Verde
contributor authorA. Keer
contributor authorM. Avalos
contributor authorM. Miki-Yoshida
contributor authorF. Paraguay-Delgado
contributor authorG. Alonso-Nuñez
date accessioned2017-05-09T00:24:26Z
date available2017-05-09T00:24:26Z
date copyrightMay, 2007
date issued2007
identifier issn2381-6872
identifier otherJFCSAU-28929#130_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/136126
description abstractThe polymer exchange membrane fuel cell (PEMFC) is considered the new power source technology for portable applications. Pt and Pt–alloy nanoparticles supported on carbon black have been used traditionally to make electrodes due to their high activity for H2 oxidation and O2 reduction under PEMFC conditions. Recently, ammonium hexachloroplatinate (IV) ((NH4)2PtCl6) has been shown to be a good precursor of metallic Pt by thermal decomposition. In addition, multi-walled carbon nanotubes (MWCNTs) present convenient physical and chemical properties to be employed as a support for electrocatalysts. MWCNTs were synthesized by spray pyrolysis using a precursor solution of ferrocene dissolved in benzene or toluene. Ammonium hexachloroplatinate, ammonium hexachlororhutenate, and ammonium hexachloropaladate were used as the Pt, Ru, and Pd precursors, respectively. Aqueous solution reaction, followed by a two stage thermal process, was utilized to support separately Pt, Ru, and Pd nanoparticles on the MWCNT. The results suggest that the deposition takes place on anchored sites formed during the aqueous reaction, due to the in situ oxidation of the external wall of the nanotube. Very good dispersion and particle size between 3nm and 12nm were obtained for each metal. Such characteristics are advantageous for the use of CNT supported electrocatalyst in PEMFC and direct methanol fuel cell (DMFC) electrodes.
publisherThe American Society of Mechanical Engineers (ASME)
titleAqueous Deposition of Metals on Multiwalled Carbon Nanotubes to be Used as Electrocatalyst for Polymer Exchange Membrane Fuel Cells
typeJournal Paper
journal volume4
journal issue2
journal titleJournal of Fuel Cell Science and Technology
identifier doi10.1115/1.2714565
journal fristpage130
journal lastpage133
identifier eissn2381-6910
keywordsMetals
keywordsFuel cells
keywordsPolymers
keywordsMembranes
keywordsMulti-walled carbon nanotubes
keywordsNanoparticles
keywordsProton exchange membrane fuel cells
keywordsNanotubes
keywordsoxidation
keywordsElectrodes
keywordsCarbon nanotubes
keywordsSprays
keywordsPyrolysis
keywordsCarbon black pigments
keywordsParticle size
keywordsBenzene AND Platinum alloys
treeJournal of Fuel Cell Science and Technology:;2007:;volume( 004 ):;issue: 002
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record