Show simple item record

contributor authorR. F. Silva
contributor authorA. Pozio
date accessioned2017-05-09T00:24:26Z
date available2017-05-09T00:24:26Z
date copyrightMay, 2007
date issued2007
identifier issn2381-6872
identifier otherJFCSAU-28929#116_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/136124
description abstractThree different types of metallic bipolar plates (commercial stainless steels, Ni-based alloys, and nitride-coated steels) were investigated in terms of their interface contact resistance (ICR) and corrosion resistance in conditions typical of a proton exchange membrane fuel cell environment. The results showed that stainless steels are unsuitable because of the formation of nonconductive oxide that leads to high ICR. Ni-based alloys showed to be prone to corrosion in acidic medium, although they have an ICR comparable to commercially available graphite. Endurance tests carried out on nitride-coated stainless-steel specimens showed a low ICR and very good corrosion resistance of this material.
publisherThe American Society of Mechanical Engineers (ASME)
titleCorrosion Study on Different Types of Metallic Bipolar Plates for Polymer Electrolyte Membrane Fuel Cells
typeJournal Paper
journal volume4
journal issue2
journal titleJournal of Fuel Cell Science and Technology
identifier doi10.1115/1.2713768
journal fristpage116
journal lastpage122
identifier eissn2381-6910
keywordsCorrosion
keywordsPlates (structures)
keywordsProton exchange membrane fuel cells
keywordsStainless steel
keywordsContact resistance
keywordsAlloys
keywordsGraphite
keywordsMeasurement AND Anodes
treeJournal of Fuel Cell Science and Technology:;2007:;volume( 004 ):;issue: 002
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record