Show simple item record

contributor authorG. Squadrito
contributor authorO. Barbera
contributor authorG. Giacoppo
contributor authorF. Urbani
contributor authorE. Passalacqua
date accessioned2017-05-09T00:24:25Z
date available2017-05-09T00:24:25Z
date copyrightAugust, 2007
date issued2007
identifier issn2381-6872
identifier otherJFCSAU-28930#350_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/136119
description abstractFuel cell technology development is one of the main activities at CNR-TAE Institute. Particular attention was devoted to polymer electrolyte fuel cells (PEFCs), which are the most probable candidates as future energy suppliers for transportation and for portable and domestic applications. The research activity was addressed to new materials and component evolution, system design, and modeling. Because a single cell is not able to supply the desired voltages also for small electronic devices, a PEFC stack of different sizes must be evolved to match the application request. The research activity focused on two different areas: small size stacks for portable applications and medium power stacks (1–4kW) for transport and stationary applications. This activity was supported by modeling and computational fluid dynamic studies, and by the evolution of dedicated test station and measurement devices. The first result of PEFC stack research was the development of a 100W stack prototype working at low pressure and based on low Pt loading electrodes evolved at CNR-ITAE. Starting from this experience, a hydrogen fueled air breathing stack of 15W for portable application was realized. The scale up of the cell active area was approached by searching for a method to allow the design of the flow field with specified geometrical characteristics and fluid dynamic properties to maintain the performance reached in small active area cells. A computer-aided design method was evolved, and the design of the 200cm2 active area cell was realized, starting, from a 50cm2 laboratory cell.
publisherThe American Society of Mechanical Engineers (ASME)
titlePolymer Electrolyte Fuel Cell Stacks at CNR-ITAE: State of the Art
typeJournal Paper
journal volume4
journal issue3
journal titleJournal of Fuel Cell Science and Technology
identifier doi10.1115/1.2756567
journal fristpage350
journal lastpage356
identifier eissn2381-6910
keywordsFlow (Dynamics)
keywordsDesign
keywordsFuel cells
keywordsPolymers
keywordsElectrolytes
keywordsComputational fluid dynamics
keywordsElectrodes
keywordsHydrogen AND Pressure
treeJournal of Fuel Cell Science and Technology:;2007:;volume( 004 ):;issue: 003
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record