Show simple item record

contributor authorLuis San Andrés
contributor authorKostandin Gjika
contributor authorGerry LaRue
contributor authorChristopher Groves
contributor authorJuan Carlos Rivadeneira
date accessioned2017-05-09T00:23:35Z
date available2017-05-09T00:23:35Z
date copyrightOctober, 2007
date issued2007
identifier issn1528-8919
identifier otherJETPEZ-26973#1035_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/135672
description abstractAdvances on the modeling of nonlinear rotor-bearing models for prediction of the dynamic shaft response of automotive turbochargers (TCs) supported on floating ring bearings (FRBs) are presented. Comprehensive test data for a TC unit operating at a top speed of 65krpm serves to validate the model predictions. The static forced performance of the support FRBs considers lubricant thermal effects, thermal expansion of the shaft and bearings, and entrance pressure losses due to centrifugal flow effects. The bearing analysis also yields linearized rotordynamic force coefficients for the inner and outer lubricant films. These coefficients are used with the rotor model to predict the synchronous response to imbalance and the system natural frequencies and stability. A method renders an accurate estimation of the test rotor imbalance by using the actual vibration measurements and influence coefficients derived from predictions using linearized bearing force coefficients. Predicted ring rotational speeds, operating radial clearances, and lubricant viscosities for the inner and outer films are the main input to the nonlinear time transient analysis. The nonlinear response model predicts the total shaft motion, with fast Fourier transforms showing the synchronous response, and amplitudes and whirl frequencies of subsynchronous motions. The predicted synchronous amplitudes are in good agreement with the measurements, in particular at high shaft speeds. The nonlinear analysis predicts multiple frequency subsynchronous motions for speeds ranging from 10krpmto55krpm (maximum speed 70krpm), with amplitudes and frequencies that correlate well with the test data. The comparisons validate the comprehensive rotor-bearings model whose ultimate aim is to save TC design time and accelerate product development.
publisherThe American Society of Mechanical Engineers (ASME)
titleA Virtual Tool for Prediction of Turbocharger Nonlinear Dynamic Response: Validation Against Test Data
typeJournal Paper
journal volume129
journal issue4
journal titleJournal of Engineering for Gas Turbines and Power
identifier doi10.1115/1.2436573
journal fristpage1035
journal lastpage1046
identifier eissn0742-4795
keywordsMotion
keywordsCompressors
keywordsLubricants
keywordsBearings
keywordsRotors
keywordsTurbines
keywordsTemperature
keywordsPressure
keywordsViscosity
keywordsFrequency AND Measurement
treeJournal of Engineering for Gas Turbines and Power:;2007:;volume( 129 ):;issue: 004
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record