Show simple item record

contributor authorStephen Wiedmann
contributor authorBob Sturges
date accessioned2017-05-09T00:21:08Z
date available2017-05-09T00:21:08Z
date copyrightJanuary, 2006
date issued2006
identifier issn1050-0472
identifier otherJMDEDB-27819#128_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/134383
description abstractThis work addresses the geometry of threaded fastener insertion at a detailed level in order to determine the nature of contact between a bolt and nut during the initial phases of thread mating. The assembly problem was modeled as a constrained three-dimensional analysis to gain an understanding about how contacts between the bolt and nut change during the thread starting counterclockwise motion. We introduce a fully detailed thread profile model which is parametrically adaptable to all practical thread forms. From this geometric representation, we derive contact state maps graphically represented as axial discs. From these maps we show the phase relationship of the bolt and nut in the critical thread-starting process. This model is based on the premise that an unspecified active or passive device will be employed for correcting alignment errors. The model serves to visualize the contact conditions which could lead to wedging and jamming events, and provides one component for such analyses.
publisherThe American Society of Mechanical Engineers (ASME)
titleA Full Kinematic Model of Thread-Starting for Assembly Automation Analysis
typeJournal Paper
journal volume128
journal issue1
journal titleJournal of Mechanical Design
identifier doi10.1115/1.2114907
journal fristpage128
journal lastpage136
identifier eissn1528-9001
keywordsManufacturing
keywordsThread
keywordsEquations
keywordsGeometry
keywordsErrors AND Fasteners
treeJournal of Mechanical Design:;2006:;volume( 128 ):;issue: 001
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record