Show simple item record

contributor authorGaurav Suri
contributor authorAnthony F. Luscher
date accessioned2017-05-09T00:21:04Z
date available2017-05-09T00:21:04Z
date copyrightMarch, 2006
date issued2006
identifier issn1050-0472
identifier otherJMDEDB-27824#479_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/134363
description abstractWith an increase in the use of polymeric materials in commercial products, snap-fits are attracting increased attention as alternatives to other, more traditional, joining methods. The field of snap-fit design is receiving greater attention as an engineering and research activity. Research in this area has focused on the development of performance models for individual features and heuristics for the design of snap-fit assemblies. An improved analytical model for cantilever hook snap-fit features is developed in this study. The modeling approach is a significant improvement over currently available analytical design equations. The model captures the effect of a snap-fit’s catch in causing contact forces to be offset from the beam’s neutral axis. Beam rotation, influence of axial force, and moment components on beam deformation are also incorporated by formulating a set of equations that model the system in its deformed configuration. The equation system is iteratively solved for several such configurations to model insertion and retention processes for snap-fits. The axial force component, which has been hitherto ignored in analytical design equations, is found to have significant effect on predicted snap-fit performance. The design space of cantilever hook features is explored by varying input design parameters. The model shows excellent agreement with experimental results, especially for low and medium retention angle snap-fit features. However, for high retention angle snap-fits, more accurate governing equations are required. Suggestions for possible improvements and future research directions are provided.
publisherThe American Society of Mechanical Engineers (ASME)
titleDevelopment of Analytical Model of Cantilever Hook Performance
typeJournal Paper
journal volume128
journal issue2
journal titleJournal of Mechanical Design
identifier doi10.1115/1.2168468
journal fristpage479
journal lastpage493
identifier eissn1528-9001
keywordsForce
keywordsCantilevers
keywordsEquations
keywordsDesign
keywordsSnap fitting
keywordsDeformation AND Modeling
treeJournal of Mechanical Design:;2006:;volume( 128 ):;issue: 002
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record