Show simple item record

contributor authorAhmed A. Shabana
contributor authorMahmoud Tobaa
contributor authorKhaled E. Zaazaa
date accessioned2017-05-09T00:20:54Z
date available2017-05-09T00:20:54Z
date copyrightSeptember, 2006
date issued2006
identifier issn1050-0472
identifier otherJMDEDB-27835#1130_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/134273
description abstractThe effect of the geometry of a wheel profile that allows only a single point of contact with the rail is investigated in this study. The local geometric properties of this profile are compared with the local geometric properties of a profile that allows for two-point contacts in order to understand the basic differences between the two profiles. A simple model is first used to examine the effect of the profile geometry on the stability and nonlinear dynamics of a suspended wheel set. The results obtained using this simple model show that the geometry of the wheel profile can significantly alter the critical speed. A computational approach is then used to investigate and quantify the effect of the wheel geometry wheel on the dynamics and stability of railroad vehicles. Two methods, the contact constraint and elastic formulations, are used. The contact constraint method employs nonlinear algebraic kinematic constraint equations to describe the contact between the wheel and the rail. The contact kinematic constraints, which eliminate one degree of freedom and do not allow for wheel/rail separation, are imposed at the position, velocity and acceleration levels. The system equations of motion are expressed in terms of the generalized coordinates and the nongeneralized surface parameters. In the formulations based on the elastic approach, the wheel has six degrees of freedom with respect to the rail, and the normal contact forces are defined as a function of the penetration using Hertz’s contact theory or using assumed stiffness and damping coefficients. In the elastic approach that allows for wheel/rail separation, the locations of the contact points are determined by solving a set of algebraic equations. The distribution of the contact forces resulting from the use of the two profiles that have different geometric properties is investigated using the two methods. Numerical results are presented for a full railroad vehicle model and the effect of the wheel profile on the vehicle stability is investigated.
publisherThe American Society of Mechanical Engineers (ASME)
titleEffect of the Wheel Geometric Design on the Nonlinear Dynamics of Railroad Vehicles
typeJournal Paper
journal volume128
journal issue5
journal titleJournal of Mechanical Design
identifier doi10.1115/1.2214739
journal fristpage1130
journal lastpage1140
identifier eissn1528-9001
keywordsVehicles
keywordsRails
keywordsWheels
keywordsGeometry
keywordsWheelsets
keywordsRailroads
keywordsEquations AND Force
treeJournal of Mechanical Design:;2006:;volume( 128 ):;issue: 005
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record