Show simple item record

contributor authorKevin W. Harrison
contributor authorEduardo Hernández-Pacheco
contributor authorHossein Salehfar
contributor authorMichael Mann
date accessioned2017-05-09T00:20:36Z
date available2017-05-09T00:20:36Z
date copyrightMay, 2006
date issued2006
identifier issn2381-6872
identifier otherJFCSAU-28925#220_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/134082
description abstractA semiempirical equation was used to represent the performance characteristics of a 20-cell proton exchange membrane electrolyzer stack. The coefficients of the equation are the exchange current densities and membrane conductivity. These coefficients were determined using experimental data and a nonlinear curve fitting method. The anode exchange current density was found to be 1.65×10−8Acm−2, the cathode exchange current density 0.09Acm−2, and the membrane conductivity 0.075Scm−1. External programmable power supplies were used to obtain the (I‐V) characteristic curve of a commercial proton exchange membrane electrolyzer. Stack current, voltage, and system temperature were monitored while 1A current steps were applied to the electrolyzer stack.
publisherThe American Society of Mechanical Engineers (ASME)
titleSemiempirical Model for Determining PEM Electrolyzer Stack Characteristics
typeJournal Paper
journal volume3
journal issue2
journal titleJournal of Fuel Cell Science and Technology
identifier doi10.1115/1.2174072
journal fristpage220
journal lastpage223
identifier eissn2381-6910
keywordsTemperature
keywordsElectric potential
keywordsAnodes
keywordsConductivity
keywordsCurrent density
keywordsMembranes
keywordsProton exchange membranes
keywordsPressure AND Fittings
treeJournal of Fuel Cell Science and Technology:;2006:;volume( 003 ):;issue: 002
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record