Show simple item record

contributor authorJosef Mertens
contributor authorVincent A. C. Haanappel
contributor authorChristian Wedershoven
contributor authorHans-Peter Buchkremer
date accessioned2017-05-09T00:20:28Z
date available2017-05-09T00:20:28Z
date copyrightNovember, 2006
date issued2006
identifier issn2381-6872
identifier otherJFCSAU-28927#415_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/134024
description abstractOne of the main targets in the development of anode-supported solid oxide fuel cell (SOFCs) is to improve the electrochemical performance. This can be achieved by optimizing processing and microstructural parameters of the SOFCs. Variations of the thickness of the cathode functional layer and the cathode current collector layer, the grain size of the powders used for applying these layers, and the sintering temperature, can influence the electrochemical performance as such that lower operation temperatures become possible without detrimentally affecting the power output to a great extent. In this study the effect of variations of the sintering temperature of the cathode on (1) the microstructure, (2) the gas diffusivity and permeability in the cathode, and (3) electrochemical performance of FZJ-type anode-supported single cells, was investigated. The FZ-Jülich cell design is based on anode-supported type cells, which are characterized by a relatively thick anode (thickness: 1.0–1.5mm) consisting of a NiO/8YSZ cermet, a thin 8YSZ electrolyte, and a bi-layered cathode. The cathode distinguished two separated layers: first a cathode functional layer consisting of La0.65Sr0.3MnO3(LSM)∕Y2O3-stabilized ZrO2 (8YSZ) and a cathode current collector layer of pure La0.65Sr0.3MnO3 (LSM). This study can be considered as a follow-up of that (Journal of Power Sources 141 (2005) 216–226) describing the improvement of the cell performance by a systematic variation of the microstructure. The experiments described in this paper and the corresponding results are part of a more extensive study to investigate in more detail the effect of the sintering temperature on the electrochemical performance of LSM-type SOFCs. Since research is still going on, conclusions, drawn in this contribution, are yet not definitive.
publisherThe American Society of Mechanical Engineers (ASME)
titleSintering Behavior of (La,Sr)MnO3 Type Cathodes for Planar Anode-Supported SOFCs
typeJournal Paper
journal volume3
journal issue4
journal titleJournal of Fuel Cell Science and Technology
identifier doi10.1115/1.2349522
journal fristpage415
journal lastpage421
identifier eissn2381-6910
keywordsTemperature
keywordsDiffusion (Physics)
keywordsPermeability
keywordsAnodes
keywordsMeasurement
keywordsSintering
keywordsSolid oxide fuel cells
keywordsElectrolytes AND Thickness
treeJournal of Fuel Cell Science and Technology:;2006:;volume( 003 ):;issue: 004
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record