Show simple item record

contributor authorJaroslaw Milewski
contributor authorAndrzej Miller
date accessioned2017-05-09T00:20:27Z
date available2017-05-09T00:20:27Z
date copyrightNovember, 2006
date issued2006
identifier issn2381-6872
identifier otherJFCSAU-28927#396_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/134020
description abstractThis paper sets out the results of mathematical modeling and numerical simulations with regard to the influences of the type and thickness of electrolyte on Solid Oxide Fuel Cell Hybrid System (SOFC-HS) performance. A change of electrolyte materials can result in total hybrid system efficiency increasing from around 48% HHV (53% LHV) to about 65% HHV (72% LHV) in an environment where turbine inlet temperature and gas turbine subsystem pressure ratio remain unchanged. The governing equations of SOFC-HS modeling are given. An adequate simulator of the SOFC stack was made and described. Based on this simulator, a model of the 260kWe Siemens Westinghouse unit was built. The performance of this SOFC-HS with different electrolyte materials and thicknesses is shown, and some characteristics are given and described. The advantages and disadvantages of different electrolyte types from a hybrid system performance point of view are indicated.
publisherThe American Society of Mechanical Engineers (ASME)
titleInfluences of The Type and Thickness of Electrolyte on Solid Oxide Fuel Cell Hybrid System Performance
typeJournal Paper
journal volume3
journal issue4
journal titleJournal of Fuel Cell Science and Technology
identifier doi10.1115/1.2349519
journal fristpage396
journal lastpage402
identifier eissn2381-6910
keywordsSolid oxide fuel cells
keywordsElectrolytes
keywordsThickness AND Temperature
treeJournal of Fuel Cell Science and Technology:;2006:;volume( 003 ):;issue: 004
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record