Show simple item record

contributor authorAhmed A. Shabana
contributor authorBrian Marquis
contributor authorMagdy El-Sibaie
contributor authorMahmoud Tobaa
date accessioned2017-05-09T00:19:08Z
date available2017-05-09T00:19:08Z
date copyrightJanuary, 2006
date issued2006
identifier issn1555-1415
identifier otherJCNDDM-25521#25_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/133289
description abstractThe sensitivity of the wheel/rail contact problem to the approximations made in some of the creepage expressions is examined in this investigation. It is known that railroad vehicle models that employ kinematic linearization can predict, particularly at high speeds, significantly different dynamic response as compared to models that are based on fully nonlinear kinematic and dynamic equations. In order to analytically examine this problem and numerically quantify the effect of the approximations used in the linearized railroad vehicle models, the fully nonlinear kinematic and dynamic equations of a wheel set are presented. The linearized kinematic and dynamic equations used in some railroad vehicle models are obtained from the fully nonlinear model in order to shed light on the assumptions and approximations used in the linearized models. The assumptions of small angles that are often made in developing railroad vehicle models and their effect on the angular velocity, angular acceleration, and the inertia forces are investigated. The velocity creepage expressions that result from the use of the assumptions of small angles are obtained and compared with the fully nonlinear expressions. Newton-Euler equations for the wheel set are presented and their dependence on Euler angles and their time derivatives is discussed. The effect of the linearization assumptions on the form of Newton-Euler equations is examined. A suspended wheel set model is used as an example to obtain the numerical results required to quantify the effect of the linearization. The results obtained in this investigation show that linearization of the creepages can lead to significant errors in the values predicted for the longitudinal and tangential forces as well as the spin moment. There are also significant differences between the two models in the prediction of the lateral and vertical forces used to evaluate the L∕V ratios as demonstrated by the results presented in this investigation.
publisherThe American Society of Mechanical Engineers (ASME)
titleEffect of the Linearization of the Kinematic Equations in Railroad Vehicle System Dynamics
typeJournal Paper
journal volume1
journal issue1
journal titleJournal of Computational and Nonlinear Dynamics
identifier doi10.1115/1.1951783
journal fristpage25
journal lastpage34
identifier eissn1555-1423
keywordsEquations of motion
keywordsParticle spin
keywordsVehicles
keywordsEquations
keywordsRailroads
keywordsWheels
keywordsWheelsets
keywordsForce
keywordsErrors AND Approximation
treeJournal of Computational and Nonlinear Dynamics:;2006:;volume( 001 ):;issue: 001
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record