Show simple item record

contributor authorD. Gruber
contributor authorN. Ponath
contributor authorJ. Müller
date accessioned2017-05-09T00:16:45Z
date available2017-05-09T00:16:45Z
date copyrightAugust, 2005
date issued2005
identifier issn2381-6872
identifier otherJFCSAU-27245#186_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/132095
description abstractA plasma polymerization process for preparing proton-conducting electrolyte membranes from tetrafluoroethylene and water is presented. They can be deposited on different substrates, e.g., gas diffusion layers or as barrier layers on other polymer electrolyte membranes. An advantage of the plasma-polymerized membranes is their lower methanol permeability due to their highly cross-linked structure. Methanol permeation measurements with 3M methanol solution exhibit methanol permeabilities which are by an order of a magnitude less than for Nafion® 115. The proton conductivity of the plasma-polymerized membranes varies from 10to160mS∕cm depending on deposition parameters.
publisherThe American Society of Mechanical Engineers (ASME)
titlePlasma-Polymerized Proton-Conducting Membranes for Reducing Methanol Permeation in DMFCs
typeJournal Paper
journal volume2
journal issue3
journal titleJournal of Fuel Cell Science and Technology
identifier doi10.1115/1.1928927
journal fristpage186
journal lastpage189
identifier eissn2381-6910
keywordsProtons
keywordsPermeability
keywordsPlasmas (Ionized gases)
keywordsMembranes
keywordsMethanol
keywordsWater
keywordsPolymerization
keywordsDirect methanol fuel cells AND Measurement
treeJournal of Fuel Cell Science and Technology:;2005:;volume( 002 ):;issue: 003
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record