Show simple item record

contributor authorNoah D. Manring
contributor authorChris L. Wray
contributor authorZhilin Dong
date accessioned2017-05-09T00:14:30Z
date available2017-05-09T00:14:30Z
date copyrightJuly, 2004
date issued2004
identifier issn0742-4787
identifier otherJOTRE9-28724#511_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/130866
description abstractThe objectives of this study are to experimentally investigate the performance characteristics of similar slipper bearings using different socket geometries. In this study, the lubrication equations for the bearing are derived based upon an assumption that the bearing deformations are small and that they may be modeled linearly. This study is based upon the hypothesis that variations in the socket geometry will impact the deformation characteristics of the bearing and thereby have an effect on the overall performance of the design. To test this hypothesis, bearings with different socket geometries are designed and tested and compared to the original bearing design with standard socket geometry. The experimental results are then used with the analytical results to numerically infer the minimum fluid-film thickness and the magnitude of deformation for the bearing. Conclusions are drawn from these results which indicate that socket geometry has a significant impact on the bearing performance and that both leakage and load-carrying capacity may be altered by adjusting the location of the contact point within the ball-and-socket joint relative to the center of the ball.
publisherThe American Society of Mechanical Engineers (ASME)
titleExperimental Studies on the Performance of Slipper Bearings Within Axial-Piston Pumps
typeJournal Paper
journal volume126
journal issue3
journal titleJournal of Tribology
identifier doi10.1115/1.1698936
journal fristpage511
journal lastpage518
identifier eissn1528-8897
keywordsBearings
keywordsLoad bearing capacity
keywordsPistons
keywordsFluid films
keywordsThickness
keywordsDeformation
keywordsDesign
keywordsPressure AND Geometry
treeJournal of Tribology:;2004:;volume( 126 ):;issue: 003
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record