| contributor author | Isamu Aoki | |
| contributor author | Masahiro Sasada | |
| date accessioned | 2017-05-09T00:13:33Z | |
| date available | 2017-05-09T00:13:33Z | |
| date copyright | November, 2004 | |
| date issued | 2004 | |
| identifier issn | 1087-1357 | |
| identifier other | JMSEFK-27832#653_1.pdf | |
| identifier uri | http://yetl.yabesh.ir/yetl/handle/yetl/130327 | |
| description abstract | Burr-free blanking requirements are strong; however, the thinner the product, the more difficult the burr-free blanking will be, due mainly to the control of the punch penetration depth. In this study, the principle of accompanying burr-free blanking problems, and the driving mechanism of methods for realizing burr-free blanking of foil were realized. The conditions for realizing successful burr-free blanking are the clearance of step 1 and punch penetration depth. Use of the piezoelectric actuator element and the design method for this was proposed as the punch drive mechanism. Good results were obtained by using this press machine for burr-free blanking of 50 μm copper foil. | |
| publisher | The American Society of Mechanical Engineers (ASME) | |
| title | Burr-Free Microblanking Using Piezoelectric Actuator | |
| type | Journal Paper | |
| journal volume | 126 | |
| journal issue | 4 | |
| journal title | Journal of Manufacturing Science and Engineering | |
| identifier doi | 10.1115/1.1812775 | |
| journal fristpage | 653 | |
| journal lastpage | 658 | |
| identifier eissn | 1528-8935 | |
| keywords | Blanking (Metalworking) | |
| keywords | Piezoelectric actuators | |
| keywords | Mechanisms | |
| keywords | Presses | |
| keywords | Displacement | |
| keywords | Design | |
| keywords | Machinery AND Clearances (Engineering) | |
| tree | Journal of Manufacturing Science and Engineering:;2004:;volume( 126 ):;issue: 004 | |
| contenttype | Fulltext | |
