Show simple item record

contributor authorAhmet Demir
contributor authorFazil O. Sonmez
date accessioned2017-05-09T00:13:06Z
date available2017-05-09T00:13:06Z
date copyrightOctober, 2004
date issued2004
identifier issn0094-4289
identifier otherJEMTA8-27063#398_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/130094
description abstractThe objective of this study is to predict the Brinell hardness distribution in cold formed parts by relating the plastic strains found by finite element (FE) analysis to hardness. Based on the material’s plastic flow curve, an analytical relation was established between the plastic strain induced in the metal during cold working and its Brinell hardness so that its hardness can be determined from numerically obtained plastic strains without producing the part and taking measurements. In order to verify the model developed in this study, cold extrusion experiments were performed on samples made of two different metals at five different extrusion ratios. These samples were cut, and at their centers Brinell hardness measurements were taken, which were then compared with the analytical predictions. The results of the analytical model compared quite well with the data obtained from experiments. The model was also verified by comparing its predictions with the experimentally determined values of hardness reported by previous researchers. The results showed that within the applicable range of Brinell hardness test, which covers a great percentage of hardness levels resulting from cold forming operations, the analytical model can reliably be used.
publisherThe American Society of Mechanical Engineers (ASME)
titlePrediction of Brinell Hardness Distribution in Cold Formed Parts
typeJournal Paper
journal volume126
journal issue4
journal titleJournal of Engineering Materials and Technology
identifier doi10.1115/1.1789960
journal fristpage398
journal lastpage405
identifier eissn1528-8889
keywordsMeasurement
keywordsExtruding
keywordsStress
keywordsFlow (Dynamics)
keywordsDeformation
keywordsWork hardening
keywordsFinite element analysis
keywordsSteel
keywordsEquations
keywordsErrors
keywordsMetals
keywordsVickers hardness AND Compression
treeJournal of Engineering Materials and Technology:;2004:;volume( 126 ):;issue: 004
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record