| contributor author | J. W. Hobbs | |
| contributor author | R. L. Burguete | |
| contributor author | E. A. Patterson | |
| date accessioned | 2017-05-09T00:10:57Z | |
| date available | 2017-05-09T00:10:57Z | |
| date copyright | September, 2003 | |
| date issued | 2003 | |
| identifier issn | 1050-0472 | |
| identifier other | JMDEDB-27757#527_1.pdf | |
| identifier uri | http://yetl.yabesh.ir/yetl/handle/yetl/128810 | |
| description abstract | By means of comparing results from finite element analysis and photoelasticity, the salient characteristics of a finite element model of a nut and bolt have been established. A number of two-dimensional and three-dimensional models were created with varying levels of complexity, and the results were compared with photoelastic results. It was found that both two-dimensional and three-dimensional models could produce accurate results provided the nut thread run-out and friction were modeled accurately. When using two-dimensional models, a number of models representing different positions around the helix of the thread were created to obtain more data for the stress distribution. This approach was found to work well and to be economical. | |
| publisher | The American Society of Mechanical Engineers (ASME) | |
| title | Investigation into the Effect of the Nut Thread Run-Out on the Stress Distribution in a Bolt Using the Finite Element Method | |
| type | Journal Paper | |
| journal volume | 125 | |
| journal issue | 3 | |
| journal title | Journal of Mechanical Design | |
| identifier doi | 10.1115/1.1567312 | |
| journal fristpage | 527 | |
| journal lastpage | 532 | |
| identifier eissn | 1528-9001 | |
| keywords | Thread | |
| keywords | Stress concentration | |
| keywords | Stress | |
| keywords | Three-dimensional models AND Finite element model | |
| tree | Journal of Mechanical Design:;2003:;volume( 125 ):;issue: 003 | |
| contenttype | Fulltext | |
