Show simple item record

contributor authorKuochen Tsai
contributor authorRodney O. Fox
contributor authorPaul A. Gillis
contributor authorSubrata Sen
date accessioned2017-05-09T00:07:54Z
date available2017-05-09T00:07:54Z
date copyrightMarch, 2002
date issued2002
identifier issn0098-2202
identifier otherJFEGA4-27170#102_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/127010
description abstractThe recently proposed multi-environment model, R. O. Fox, 1998, “On the Relationship between Lagrangian Micromixing Models and Computational Fluid Dynamics,” Chem. Eng. Proc., Vol. 37, pp. 521–535. J. Villermaux and J. C. Devillon, 1994, “A Generalized Mixing Model for Initial Contacting of Reactive Fluids,” Chem. Eng. Sci., Vol. 49, p. 5127, provides a new category of modeling techniques that can be employed to resolve the turbulence-chemistry interactions found in reactive flows. By solving the Eulerian transport equations for volume fractions and chemical species simultaneously, the local concentrations of chemical species in each environment can be obtained. Assuming micromixing occurs only in phase space, the well-known IEM (interaction by exchange with the mean) model can be applied to close the micromixing term. This simplification allows the model to use micromixing timescales obtained from more sophisticated models and can be applied to any number of environments. Although the PDF shape doesn’t change under this assumption, the interaction between turbulence and chemistry can be resolved up to the second moments without any ad-hoc assumptions for the mean reaction rates. Furthermore, the PDF shape is found to have minimal effect on mean reaction rates for incompressible turbulent reacting flows. In this formulation, a spurious dissipation term arises in the transport equation of the scalar variances due to the use of Eulerian transport equations. A procedure is proposed to eliminate this spurious term. The model is applied to simulate the experiment of S. Komori, et al., 1993, “Measurements of Mass Flux in a Turbulent Liquid Flow With a Chemical Reaction,” AIChE J., Vol. 39, pp. 1611–1620, for a reactive mixing layer and the experiment of K. Li and H. Toor, 1986, “Turbulent Reactive Mixing With a Series Parallel reaction: Effect of Mixing on Yield,” AIChE J., Vol. 32, pp. 1312–1320, with a two-step parallel/consecutive reaction. The results are found to be in good agreement with the experimental data of Komori et al. and the PDF simulation of K. Tsai and R. Fox, 1994, “PDF Simulation of a Turbulent Series-Parallel Reaction in an Axisymmetric Reactor,” Chem. Eng. Sci., Vol. 49, pp. 5141–5158, for the experiment of Li and Toor. The resulting model is implemented in the commercial CFD code, FLUENT,1 and can be applied with any number of species and reactions.
publisherThe American Society of Mechanical Engineers (ASME)
titleA Finite-Mode PDF Model for Turbulent Reacting Flows
typeJournal Paper
journal volume124
journal issue1
journal titleJournal of Fluids Engineering
identifier doi10.1115/1.1431546
journal fristpage102
journal lastpage107
identifier eissn1528-901X
keywordsScalars
keywordsFlow (Dynamics)
keywordsTurbulence
keywordsEnergy dissipation
keywordsEquations
keywordsSimulation
keywordsChemistry
keywordsChemical kinetics
keywordsShapes
keywordsDensity AND Reynolds number
treeJournal of Fluids Engineering:;2002:;volume( 124 ):;issue: 001
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record