| contributor author | J. A. King | |
| date accessioned | 2017-05-09T00:06:10Z | |
| date available | 2017-05-09T00:06:10Z | |
| date copyright | April, 1968 | |
| date issued | 1968 | |
| identifier issn | 1528-8919 | |
| identifier other | JETPEZ-26668#97_1.pdf | |
| identifier uri | http://yetl.yabesh.ir/yetl/handle/yetl/125979 | |
| description abstract | Research on pumps, particularly those for transporting cryogenic fluids, is very expensive. Rocketdyne has tested pumps with air as the working fluid and has found that a very good correlation exists between air test data and liquid test data. This paper gives a description of the air rigs used by Rocketdyne and compares the data taken in air with data taken in water, LOX, RP-1, and liquid hydrogen. Also presented is the effect of tip clearance on the head of an axial-flow pump as determined from air tests. | |
| publisher | The American Society of Mechanical Engineers (ASME) | |
| title | Testing Pumps in Air | |
| type | Journal Paper | |
| journal volume | 90 | |
| journal issue | 2 | |
| journal title | Journal of Engineering for Gas Turbines and Power | |
| identifier doi | 10.1115/1.3609173 | |
| journal fristpage | 97 | |
| journal lastpage | 104 | |
| identifier eissn | 0742-4795 | |
| keywords | Pumps | |
| keywords | Testing | |
| keywords | Fluids | |
| keywords | Clearances (Engineering) | |
| keywords | Axial flow | |
| keywords | Hydrogen AND Water | |
| tree | Journal of Engineering for Gas Turbines and Power:;1968:;volume( 090 ):;issue: 002 | |
| contenttype | Fulltext | |
