| contributor author | J. Hematian | |
| contributor author | P. M. Wild | |
| date accessioned | 2017-05-09T00:05:00Z | |
| date available | 2017-05-09T00:05:00Z | |
| date copyright | October, 2001 | |
| date issued | 2001 | |
| identifier issn | 0094-4289 | |
| identifier other | JEMTA8-27024#442_1.pdf | |
| identifier uri | http://yetl.yabesh.ir/yetl/handle/yetl/125277 | |
| description abstract | A brief review of the literature on wrinkling in deep drawing processes is presented. It is noted that, while there is a large body of literature related to thin sheet, only one study related to thick sheet or plate has been identified. Finite element based models are used to investigate the effect of initial tooling imperfections on the initiation of wrinkling in deep drawing of thick sheet. Two sorts of tooling imperfections, punch displacement and blank tilting, are considered. The simulation results are compared qualitatively to the experimental forming operation. It is confirmed that tooling imperfections, in particular blank tilting, are an important type of imperfection governing the wrinkling behavior of the blank in deep drawing process. | |
| publisher | The American Society of Mechanical Engineers (ASME) | |
| title | The Effects of Tooling Imperfections on the Initiation of Wrinkling in Finite Element Modeling of a Deep Drawing Process | |
| type | Journal Paper | |
| journal volume | 123 | |
| journal issue | 4 | |
| journal title | Journal of Engineering Materials and Technology | |
| identifier doi | 10.1115/1.1396351 | |
| journal fristpage | 442 | |
| journal lastpage | 446 | |
| identifier eissn | 1528-8889 | |
| keywords | Finite element analysis | |
| keywords | Modeling | |
| keywords | Displacement | |
| keywords | Tooling | |
| keywords | Blanks AND Finite element model | |
| tree | Journal of Engineering Materials and Technology:;2001:;volume( 123 ):;issue: 004 | |
| contenttype | Fulltext | |
