Show simple item record

contributor authorKoichiro Take
contributor authorRalph L. Webb
date accessioned2017-05-09T00:04:35Z
date available2017-05-09T00:04:35Z
date copyrightSeptember, 2001
date issued2001
identifier issn1528-9044
identifier otherJEPAE4-26195#189_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/125027
description abstractThe air flow rate available for cooling of notebook computers is very limited. Thus, notebook computer manufacturers desire a “passive” cooling method. Heat pipes are typically used to transport the heat from the CPU to a forced convection, air-cooled condenser. This paper describes a passive, keyboard sized aluminum Integrated Plate Heat Pipe (IP-HP) that has been developed for notebook computers. Analysis was performed to estimate the several thermal resistances in the heat pipe, including the effect of the vapor pressure drop. The modified design using a heat spreader at the evaporator significantly reduces the heat pipe resistance. Further work was done to evaluate the thermal contact resistance at the IP-HP/CPU interface. Test results show that the IP-HP can reject 18 W while maintaining the CPU 65°C above ambient temperature.
publisherThe American Society of Mechanical Engineers (ASME)
titleThermal Performance of Integrated Plate Heat Pipe With a Heat Spreader
typeJournal Paper
journal volume123
journal issue3
journal titleJournal of Electronic Packaging
identifier doi10.1115/1.1348010
journal fristpage189
journal lastpage195
identifier eissn1043-7398
keywordsHeat
keywordsTemperature
keywordsElectrical resistance
keywordsHeat pipes
keywordsFlat heat pipes
keywordsDrops
keywordsThermal resistance
keywordsDesign
keywordsContact resistance
keywordsCondensers (steam plant) AND Aluminum
treeJournal of Electronic Packaging:;2001:;volume( 123 ):;issue: 003
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record