Determination of Poisson’s Ratio by Spherical Indentation Using Neural Networks—Part I: Theory
| contributor author | N. Huber | |
| contributor author | A. Konstantinidis | |
| contributor author | Ch. Tsakmakis | |
| date accessioned | 2017-05-09T00:04:04Z | |
| date available | 2017-05-09T00:04:04Z | |
| date copyright | March, 2001 | |
| date issued | 2001 | |
| identifier issn | 0021-8936 | |
| identifier other | JAMCAV-26509#218_1.pdf | |
| identifier uri | http://yetl.yabesh.ir/yetl/handle/yetl/124721 | |
| description abstract | When studying analytically the penetration of an indenter of revolution into an elastic half-space use is commonly made of the fraction Er=E/(1−ν2). Because of this, only Er is determined from the indentation test, while the value of ν is usually assumed. However, as shown in the paper, if plastic deformation is involved during loading, the depth-load trajectory depends on the reduced modulus and, additionally, on the Poisson ratio explicitly. The aim of the paper is to show, with reference to a simple plasticity model exhibiting linear isotropic hardening, that the Poisson ratio can be determined uniquely from spherical indentation if the onset of plastic yield is known. To this end, a loading and at least two unloadings in the plastic regime have to be considered. Using finite element simulations, the relation between the material parameters and the quantities characterizing the depth-load response is calculated pointwise. An approximate inverse function represented by a neural network is derived on the basis of these data. | |
| publisher | The American Society of Mechanical Engineers (ASME) | |
| title | Determination of Poisson’s Ratio by Spherical Indentation Using Neural Networks—Part I: Theory | |
| type | Journal Paper | |
| journal volume | 68 | |
| journal issue | 2 | |
| journal title | Journal of Applied Mechanics | |
| identifier doi | 10.1115/1.1354624 | |
| journal fristpage | 218 | |
| journal lastpage | 223 | |
| identifier eissn | 1528-9036 | |
| keywords | Poisson ratio | |
| keywords | Engineering simulation | |
| keywords | Finite element analysis | |
| keywords | Artificial neural networks | |
| keywords | Deformation | |
| keywords | Hardening AND Stress | |
| tree | Journal of Applied Mechanics:;2001:;volume( 068 ):;issue: 002 | |
| contenttype | Fulltext |