Show simple item record

contributor authorE. Bilgen
date accessioned2017-05-09T00:03:22Z
date available2017-05-09T00:03:22Z
date copyrightFebruary, 2000
date issued2000
identifier issn0199-6231
identifier otherJSEEDO-28288#30_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/124291
description abstractNatural convection, radiation and conduction heat transfer in passive solar massive wall systems with fins attached to the heated surface and without glazing is experimentally studied. The system was 0.78 m high, 0.40 m wide, and 0.10 m thick concrete wall with 0.025 m long, 0.004 m thick horizontal fins made as an integral part of it and placed at 0.01 m intervals. A heat source was used to impose a constant heat flux which could be varied from about 200 to 800 W/m2 . Temperatures at various points and heat flux by convection at the back were measured. Using periodicity hypothesis and various assumptions, the wall with fins was also analyzed theoretically. The results indicate that for the case considered, about 35 percent of the heat flux imposed on the finned surface goes through the system and is dissipated at the back. [S0199-6231(00)00701-2]
publisherThe American Society of Mechanical Engineers (ASME)
titlePassive Solar Massive Wall Systems With Fins Attached on the Heated Wall and Without Glazing
typeJournal Paper
journal volume122
journal issue1
journal titleJournal of Solar Energy Engineering
identifier doi10.1115/1.556274
journal fristpage30
journal lastpage34
identifier eissn1528-8986
keywordsWall systems
keywordsSolar energy AND Fins
treeJournal of Solar Energy Engineering:;2000:;volume( 122 ):;issue: 001
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record