Show simple item record

contributor authorM. O. L. Hansen
contributor authorB. M. Pedersen
date accessioned2017-05-09T00:00:48Z
date available2017-05-09T00:00:48Z
date copyrightMay, 1999
date issued1999
identifier issn0199-6231
identifier otherJSEEDO-28284#128_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/122792
description abstractThe actuator disc model is applied on lattice-type meteorological masts to estimate the influence of the tower on the accuracy of the measured wind speed. Combining the results with corrections for the boom, on which the anemometer is mounted, good agreement is found for measurements made on the mast at TjŒcereborg. Iso-speed plots are computed to estimate the influence of different solidities. Depending on the distance from the mast and the solidity the influence from a typical mast is normally less than 3%.
publisherThe American Society of Mechanical Engineers (ASME)
titleInfluence of the Meteorology Mast on a Cup Anemometer
typeJournal Paper
journal volume121
journal issue2
journal titleJournal of Solar Energy Engineering
identifier doi10.1115/1.2888150
journal fristpage128
journal lastpage131
identifier eissn1528-8986
keywordsMeasurement
keywordsWind velocity
keywordsActuators AND Disks
treeJournal of Solar Energy Engineering:;1999:;volume( 121 ):;issue: 002
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record