Show simple item record

contributor authorA. Neumann
contributor authorA. Schmitz
date accessioned2017-05-09T00:00:47Z
date available2017-05-09T00:00:47Z
date copyrightMay, 1999
date issued1999
identifier issn0199-6231
identifier otherJSEEDO-28284#116_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/122789
description abstractVideo camera systems monitoring a diffuse reflecting target for measuring the flux distribution of concentrated solar radiation are quite common. This technique cannot be used if parts of the experimental setup screen the surface of the target. The development of a new measurement system with a compact geometry and a new optical design is described. With this system it is possible to measure the flux distribution behind parts of an experiment and at any position of the plane of measurement, without any alteration of the setup. The sources of error, especially those of the target and the camera, are described and discussed, and finally a comparison to the existing FATMES-System, which has been performed at the solar furnace of the DLR in Cologne, is presented. Due to its measurement principle the new system is called ’Scanning Camera and Target Measurement System‘ (acronym: SCATMES).
publisherThe American Society of Mechanical Engineers (ASME)
titleThe SCATMES Device for Measurement of Concentrated Solar Radiation
typeJournal Paper
journal volume121
journal issue2
journal titleJournal of Solar Energy Engineering
identifier doi10.1115/1.2888148
journal fristpage116
journal lastpage120
identifier eissn1528-8986
keywordsSolar radiation
keywordsMeasurement systems
keywordsOptical design techniques
keywordsSystem monitoring
keywordsVideo cameras
keywordsSolar energy
keywordsErrors
keywordsFurnaces AND Geometry
treeJournal of Solar Energy Engineering:;1999:;volume( 121 ):;issue: 002
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record