Show simple item record

contributor authorJ. Li
contributor authorL. San Andrés
contributor authorJ. Vance
date accessioned2017-05-08T23:59:39Z
date available2017-05-08T23:59:39Z
date copyrightApril, 1999
date issued1999
identifier issn1528-8919
identifier otherJETPEZ-26788#355_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/122164
description abstractA bulk-flow model for calculation of the dynamic force characteristics in a single cavity, multiple-pocket gas damper seal is presented. Flow turbulence is accounted for by using turbulent shear stress parameters and Moody’s friction factors in the circumferential momentum equation. Zeroth-order-equations describe the isothermal flow field for a centered seal, and first-order equations govern the perturbed flow for small amplitude rotor lateral motions. Comparisons to limited measurements from a four-pocket gas damper seal show the current model to predict well the mass flow rate and the direct damping coefficient. For a reference two-bladed teeth-on-stator labyrinth seal, the current model predicts similar rotordynamic coefficients when compared to results from a two control volume, bulk-flow model. Force coefficients from a reference single-cavity, four pocket gas damper depend on the rotor speed and pressure drop with magnitudes decreasing as the rotor whirl frequency increases. The multiple-pocket gas damper seal provides substantially more damping than a conventional labyrinth seal of the same dimensions. The damper seal cross-coupled stiffness coefficients are small though sensitive to the inlet circumferential preswirl flow.
publisherThe American Society of Mechanical Engineers (ASME)
titleA Bulk-Flow Analysis of Multiple-Pocket Gas Damper Seals
typeJournal Paper
journal volume121
journal issue2
journal titleJournal of Engineering for Gas Turbines and Power
identifier doi10.1115/1.2817128
journal fristpage355
journal lastpage363
identifier eissn0742-4795
keywordsFlow (Dynamics)
keywordsDampers
keywordsEquations
keywordsRotors
keywordsCavities
keywordsDamping
keywordsForce
keywordsTurbulence
keywordsDimensions
keywordsStress
keywordsShear (Mechanics)
keywordsFriction
keywordsMeasurement
keywordsMotion
keywordsMomentum
keywordsPressure drop
keywordsStators
keywordsStiffness AND Whirls
treeJournal of Engineering for Gas Turbines and Power:;1999:;volume( 121 ):;issue: 002
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record